- Key Features
- Brightness : 2,500 cd/m2 (Typ.)
- Life Time : 50,000 hours
- Bezel : 11.4 mm (L/R), 13.5 mm (T/B)Depth : 89 mm
- Interface : HDMI (2) / DP / DVI / RJ45 / IR / RS232C / USB / SD Card / External speaker out (L/R)
The brightness has been increased to 2,500 cd/m2 compared
to the previous WX30 model, making the XS2C
the ultimate screen for outdoor visibility.
Advanced Local Dimming
The backlighting in specific areas of the screen can be controlled
to increase contrast and provide a clearer image.
QWP (Quarter Wave Plate)
FPR (Film-type Patterned Retarder) technology is embedded with a QWP which enables clear visibility even when the viewer is wearing polarized sunglasses.
Fan-Less Noise Reduction
The XS2C is the perfect choice for an in-window
environment due to the removal of the cooling
fan. Its operating noise level is under 25 dB,
which is quieter than a recording studio (30 dB).
Enhanced Design Configuration
The slimmer depth saves space for installation and
makes the enclosure design slimmer.
Low Power Consumption Using The M+ Panel
The M+ panel offers excellent energy efficiency and
cost savings and decreases power consumption by 30
compared to conventional RGB panels.
Smart Brightness Control
The auto-brightness sensor and preset time scheduler save power whenever possible.
Dust & Humidity Protection
The conformal coating enhances circuit board reliability by
protecting it from dust, iron shavings, humidity and other
High Operating Temperature
The panel offers superb reliability under high operating
temperatures and reduces cooling fan usage.
Real-Time Remote Monitoring
When an alarm occurs, an email notification is sent through
the SNMP using the SuperSign C or SI software. In case a
malfunction or error occurs, real-time remote care is available.
Saving System Log Files
The XS2C supports log file back-up for fault clarification when
the display fails. This allows you to conveniently check when
an error has occurred.
|Resolution||1,920 x 1,080 (FHD)|
|Brightness (Typ., cd/m²)||2500|
|Input||HDMI(2), DP, DVI-D, Audio, USB, IR Receiver, Pixel Sensor|
|Output||DP, External Speaker Out (L/R)|
|External Control||RS232C (In/Out), RJ45|
|Bezel Width||11.4 mm (L/R), 13.5 mm (T/B)|
|Monitor Dimension (W x H x D)||1,238.4 x 712.4 x 89 mm|
|Operation Temperature||0°C to 45°C (w/o Direct Sunlight) / 0°C to 35°C (Direct Sunlight)|
|Operation Humidity||10 % to 80 %|
|Power Supply||100-240V~, 50/60Hz|
|Power Type||Built-In Power|
|Typ./Max||220 W / 260 W|
|Smart Energy Saving||100 W|
|Safety||UL / cUL / CB / TUV / KC|
|EMC||FCC Class "A" / CE / KC|
|Content Management Software||SuperSign W|
|Control and Monitoring Software||SuperSign C|
|Basic||Remote Controller (2 batteries included), Power Cord, HDMI Cable, Manual (ESG&EIG)|
|Optional||LSW630 (Wall Mount), KT-SP0, AN-WF500 ** Stand is not available|